Cusco Wide Tread Lower Front Control Arm Set – 2013–2016 Scion FR-S / 2013–2026 Subaru BRZ / Toyota 86 & GR86
Cusco Wide Tread Lower Front Control Arm Set – 2013–2016 Scion FR-S / 2013–2026 Subaru BRZ / Toyota 86 & GR86
For drivers who spend weekends at autocross, track days, or carving canyon roads, the Cusco Wide Tread Lower Front Control Arm Set is a serious front-end upgrade. These direct-replacement front lower control arms are designed to increase front track width and add negative camber, giving you the alignment flexibility and front-end grip needed to get the most out of a lowered 86/BRZ chassis.
By optimizing tire contact patch and reducing unwanted alignment changes under load, these arms help deliver sharper steering response, better front-end stability, and more even tire wear—especially on cars running coilovers, lowering springs, or aggressive wheel and tire setups.
Key Features
- Direct Replacement Design: Installs in place of the factory front lower control arms.
- Wider Front Track: Increases front tread width for improved turn-in and cornering stability.
- Added Negative Camber: Helps improve tire contact patch and front grip on lowered performance setups.
- Heavy-Duty Steel Construction: Fabricated for strength and long-term durability under hard driving conditions.
- Hard Rubber Bushings: Minimize alignment changes under load while preserving more street comfort than a full spherical setup.
- Multi-Position Adjustment: Six-position set screws allow incremental 5mm adjustments.
- Cusco Blue Finish: Powder-coated for corrosion resistance and a clean motorsport look.
- Sold as a Pair: Complete front control arm set for one vehicle.
Why We Like It
This is one of the best ways to properly add front grip on the 86/BRZ platform. Instead of relying only on wheel offset to chase a wider stance, these arms give you a more suspension-correct way to gain track width and camber—making the car feel more precise and planted when you’re pushing it.
Adjustment Range
- Incremental Adjustment: 5mm steps
- Possible Offset Positions: 0mm, +5mm, +10mm
- Up to +15mm: Possible with modified tie rod ends
Specifications
- Part Number: 965-462-A
- Position: Front
- Component: Wide tread lower front control arm set
- Material: Heavy-duty steel
- Bushing Type: Hard rubber
- Adjustment Method: Six-position set screw system
- Adjustment Increments: 5mm
- Sold As: Pair
- Finish: Cusco blue powder coat
Installation Notes
- Professional installation is recommended.
- A full alignment is required after installation.
- Modified tie rod ends may be required to safely utilize the maximum +15mm setting.
- Ideal for lowered vehicles using coilovers or lowering springs.
What’s in the Box
- (1) Pair of Cusco Wide Tread Lower Front Control Arms
Compatibility & Disclaimers
Designed for the vehicles listed above. Final camber and track settings will depend on ride height, wheel/tire setup, upper mount settings, and tie rod configuration. Always confirm safe thread engagement and perform a complete alignment after installation.
Original: $6,590.00
-65%$6,590.00
$2,306.50More Images
Cusco Wide Tread Lower Front Control Arm Set – 2013–2016 Scion FR-S / 2013–2026 Subaru BRZ / Toyota 86 & GR86
For drivers who spend weekends at autocross, track days, or carving canyon roads, the Cusco Wide Tread Lower Front Control Arm Set is a serious front-end upgrade. These direct-replacement front lower control arms are designed to increase front track width and add negative camber, giving you the alignment flexibility and front-end grip needed to get the most out of a lowered 86/BRZ chassis.
By optimizing tire contact patch and reducing unwanted alignment changes under load, these arms help deliver sharper steering response, better front-end stability, and more even tire wear—especially on cars running coilovers, lowering springs, or aggressive wheel and tire setups.
Key Features
- Direct Replacement Design: Installs in place of the factory front lower control arms.
- Wider Front Track: Increases front tread width for improved turn-in and cornering stability.
- Added Negative Camber: Helps improve tire contact patch and front grip on lowered performance setups.
- Heavy-Duty Steel Construction: Fabricated for strength and long-term durability under hard driving conditions.
- Hard Rubber Bushings: Minimize alignment changes under load while preserving more street comfort than a full spherical setup.
- Multi-Position Adjustment: Six-position set screws allow incremental 5mm adjustments.
- Cusco Blue Finish: Powder-coated for corrosion resistance and a clean motorsport look.
- Sold as a Pair: Complete front control arm set for one vehicle.
Why We Like It
This is one of the best ways to properly add front grip on the 86/BRZ platform. Instead of relying only on wheel offset to chase a wider stance, these arms give you a more suspension-correct way to gain track width and camber—making the car feel more precise and planted when you’re pushing it.
Adjustment Range
- Incremental Adjustment: 5mm steps
- Possible Offset Positions: 0mm, +5mm, +10mm
- Up to +15mm: Possible with modified tie rod ends
Specifications
- Part Number: 965-462-A
- Position: Front
- Component: Wide tread lower front control arm set
- Material: Heavy-duty steel
- Bushing Type: Hard rubber
- Adjustment Method: Six-position set screw system
- Adjustment Increments: 5mm
- Sold As: Pair
- Finish: Cusco blue powder coat
Installation Notes
- Professional installation is recommended.
- A full alignment is required after installation.
- Modified tie rod ends may be required to safely utilize the maximum +15mm setting.
- Ideal for lowered vehicles using coilovers or lowering springs.
What’s in the Box
- (1) Pair of Cusco Wide Tread Lower Front Control Arms
Compatibility & Disclaimers
Designed for the vehicles listed above. Final camber and track settings will depend on ride height, wheel/tire setup, upper mount settings, and tie rod configuration. Always confirm safe thread engagement and perform a complete alignment after installation.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
For drivers who spend weekends at autocross, track days, or carving canyon roads, the Cusco Wide Tread Lower Front Control Arm Set is a serious front-end upgrade. These direct-replacement front lower control arms are designed to increase front track width and add negative camber, giving you the alignment flexibility and front-end grip needed to get the most out of a lowered 86/BRZ chassis.
By optimizing tire contact patch and reducing unwanted alignment changes under load, these arms help deliver sharper steering response, better front-end stability, and more even tire wear—especially on cars running coilovers, lowering springs, or aggressive wheel and tire setups.
Key Features
- Direct Replacement Design: Installs in place of the factory front lower control arms.
- Wider Front Track: Increases front tread width for improved turn-in and cornering stability.
- Added Negative Camber: Helps improve tire contact patch and front grip on lowered performance setups.
- Heavy-Duty Steel Construction: Fabricated for strength and long-term durability under hard driving conditions.
- Hard Rubber Bushings: Minimize alignment changes under load while preserving more street comfort than a full spherical setup.
- Multi-Position Adjustment: Six-position set screws allow incremental 5mm adjustments.
- Cusco Blue Finish: Powder-coated for corrosion resistance and a clean motorsport look.
- Sold as a Pair: Complete front control arm set for one vehicle.
Why We Like It
This is one of the best ways to properly add front grip on the 86/BRZ platform. Instead of relying only on wheel offset to chase a wider stance, these arms give you a more suspension-correct way to gain track width and camber—making the car feel more precise and planted when you’re pushing it.
Adjustment Range
- Incremental Adjustment: 5mm steps
- Possible Offset Positions: 0mm, +5mm, +10mm
- Up to +15mm: Possible with modified tie rod ends
Specifications
- Part Number: 965-462-A
- Position: Front
- Component: Wide tread lower front control arm set
- Material: Heavy-duty steel
- Bushing Type: Hard rubber
- Adjustment Method: Six-position set screw system
- Adjustment Increments: 5mm
- Sold As: Pair
- Finish: Cusco blue powder coat
Installation Notes
- Professional installation is recommended.
- A full alignment is required after installation.
- Modified tie rod ends may be required to safely utilize the maximum +15mm setting.
- Ideal for lowered vehicles using coilovers or lowering springs.
What’s in the Box
- (1) Pair of Cusco Wide Tread Lower Front Control Arms
Compatibility & Disclaimers
Designed for the vehicles listed above. Final camber and track settings will depend on ride height, wheel/tire setup, upper mount settings, and tie rod configuration. Always confirm safe thread engagement and perform a complete alignment after installation.
